Grade 904L is austenitic stainless steel. Compared with 316L, its added molybdenum is more resistant to local chloride erosion (pitting and crevices), especially the added copper is effective against all concentrations of sulfuric acid. Its high alloying content may also make it more resistant to chloride stress corrosion cracking. Its low carbon content makes 904L resistant to welding sensitization and prevents intergranular corrosion.
The 904L alloy is used in piping systems, pollution control equipment, heat exchangers, and bleaching systems.
SS904L material can be made into rolls, plates, strips, lines, tubes, profiles, bars, Angle steel and other shapes.
| Product Name | Stainless Steel Sheet Plate |
| Standard | AISI,ASTM,BS.DIN.EN,GB,JIS etc. |
| Thickness | Cold Rolled:0.2- 3.0mm |
| Hot Rolled: 3.0- 18.0mm |
| Thick Plate:20 - 150mm |
| Width | Cold Rolled:1000,1219,1250mm |
| Hot Rolled:1250,1500,1800,2000,2200mm |
| Length | Fixed Size:1220x2440,1500 x6000,1800 x(6000 -9000),2200 x(6000- 12000)mm or as Required |
| Tolerance | According to Standard |
| Surface | NO.1,2D,2B,NO.4,HL,BA,8K etc. |
| Applications | Construction,Modern Architecture,Chemical and Fuel Tankers,Chemical and Petro-chemical Plants, Food Processing and Pharmaceutical lndustries where Clean Environments are Required |
| Quality Management | ISO9001,CE,Third Party Testing / Inspection, Certifications which Apply forBuyers'Countries |
| Samples | Kindly Discuss with Sales Assistant |
| Lead Time | Depends on Specifications,Quantity etc. |
| Package | Standard Seaworthy Package or as Required |
| Price Term | CIF CFR FOB EX-WORK |
| Payment Method | T/T,LC etc. |
Chemical composition：
| 904L | C | Mn | P | S | Si | Cr | Ni | N | Mo |
| Requirements% | ≤0.02 | 2 | ≤0.045 | ≤0.035 | ≤1.00 | 19.0-23.0 | 23.0-28.0 | ≤0.10 | 4.0-5.0 |
Corresponding table of product brand：
| DIN | EN | ASTMAISl | UNS | GB |
| 1.431 | x10CrNi18-8 | 301 |
|
|
| 1.4318 | X2CNiN18-7 | 301LN |
|
|
| 1.4307 | x2CNi18-9 | 304L | S30403 |
|
| 1.4306 | x2CINi19-11 | 304L | S30403 | 0OCr18Ni9 |
| 1.4311 | x2CrNiN18-10 | 304LN | S30453 |
|
| 1.4301 | X5CrNi18-10 | 304 | S30400 | 06Cr19Ni10(GB/T3280-2007) |
| 1.4948 | X6CrN18-11 | 304H | S30409 |
|
| 1.4303 | x5CrNi18-12 | 305 |
|
|
| 1.4541 | x6CrNiT18-10 | 321 | S32100 | 0Cr18Ni11Ti |
| 1.4878 | x12CrNiTi18-9 | 321H | S32109 |
|
| 1.4404 | x2CrNiMo17-12-2 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4432 | x2CrNiMo17-12-3 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4435 | x2CrNiMo18-14-3 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4401 | X5CrNiMo17-12-2 | 316 | S31600 | 0Cr17Ni12Mo2 |
| 1.4436 | x3CrNiMo17-13-3 | 316 | S31600 | 0Cr17Ni12Mo2 |
| 1.4406 | x2CtNiMoN17-12-2 | 316LN | S31653 |
|
| 1.4571 | x6CrNiMoTi17-12-2 | 316Ti | S31635 |
|
| 1.4429 | x2CrNiMoN17-13-3 | 316LN | S31653 |
|
| 1.4438 | ×2CrNiMo18-15-4 | 317L | S31703 |
|
| x10CrNiTi18-9 | 347 |
| 0Cr18Ni11Nb |
| 1.4512 | x6CrTi12 | 409 |
| 0Cr11Ti |
|
|
| SS41000 | oCr13 |
|
| 410 |
| 1Cr13 |
|
| 4201 |
| 2Cr13 |
| 1.4016 | x6Cr17 | 430 |
| 1Cr17 |
| 1.4118 | x40CrMo15 | 440A | S44002 | 8Cr13 |
| 1.4112 |
| 440B | S44004 | 9Cr13 |
| 1.4125 |
| 440C | S44003 | 11Cr18 |
|
| 440F | S44020 |
|
| 1.4539 | 1NiCrMoCu25-20-5 | 904L | N08904 | 00Cr20Ni25Mo4.5Cu |
| 1.4547 | X1CrNiMoCuN20-18-7 |
| S31254 |
|
Surface classification：
| Surface | Characteristic | Processing Technology |
| N0.1 | Original | Pickled after hot rolling |
| 2D | Blunt | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling |
| 2B | Blurred | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + tempering rolling |
| N0.3 | Matte | Polishing and tempering rolling with 100-120 mesh abrasive materials |
| N0.4 | Matte | Polishing and tempering rolling with 150-180 mesh abrasive material |
| NO.240 | Matte | Polishing and tempering rolling with 240 mesh abrasive materials |
| NO.320 | Matte | Polishing and tempering rolling with 320 mesh abrasive materials |
| NO.400 | Matte | Polishing and tempering rolling with 400 mesh abrasive materials |
| HL | Brushed | Grind the surface of the steel belt with an appropriate grinding grain size to make it show a certain longitudinal texture |
| BA | Bright | The surface is annealed and shows high reflectivity |
| 6K | Mirror | Rough grinding and polishing |
| 8K | Mirror | Fine grinding and polishing |
