Sus201/201 stainless steel is a widely used precipitation hardening grade, high hardness, high strength, good corrosion resistance. Its performance is similar to that of SS302 stainless steel.
SS202 machinability to produce long rubber chip. It can also be processed in the annealed state. For full martensitic transformation and heat treatment, the material must be immersed at 1038°C(1900°F) for 30 min and cooled below 16°C(60°F). Do not use oxyacetylene welding connection. 202 steel material can be welded by ordinary fusion resistance method. SS 202 has good toughness at low temperature.
Grade 202 or 201 materials can be made into rolls, plates, strips, lines, tubes, profiles, bars, angles, etc.
| Product Name | Stainless Steel Sheet Plate |
| Standard | AISI,ASTM,BS.DIN.EN,GB,JIS etc. |
| Thickness | Cold Rolled:0.2- 3.0mm |
| Hot Rolled: 3.0- 18.0mm |
| Thick Plate:20 - 150mm |
| Width | Cold Rolled:1000,1219,1250mm |
| Hot Rolled:1250,1500,1800,2000,2200mm |
| Length | Fixed Size:1220x2440,1500 x6000,1800 x(6000 -9000),2200 x(6000- 12000)mm or as Required |
| Tolerance | According to Standard |
| Surface | NO.1,2D,2B,NO.4,HL,BA,8K etc. |
| Applications | Construction,Modern Architecture,Chemical and Fuel Tankers,Chemical and Petro-chemical Plants, Food Processing and Pharmaceutical lndustries where Clean Environments are Required |
| Quality Management | ISO9001,CE,Third Party Testing / Inspection, Certifications which Apply forBuyers'Countries |
| Samples | Kindly Discuss with Sales Assistant |
| Lead Time | Depends on Specifications,Quantity etc. |
| Package | Standard Seaworthy Package or as Required |
| Price Term | CIF CFR FOB EX-WORK |
| Payment Method | T/T,LC etc. |
Chemical composition：
| SUS201/201 | C | Mn | P | S | Si | Cr | Ni | N |
| Requirements% | ≤0.15 | 5.5-7.5 | ≤0.060 | ≤0.030 | ≤1.00 | 16.0–18.0 | 3.5–5.5 | ≤0.25 |
Corresponding table of product brand：
| DIN | EN | ASTMAISl | UNS | GB |
| 1.431 | x10CrNi18-8 | 301 |
|
|
| 1.4318 | X2CNiN18-7 | 301LN |
|
|
| 1.4307 | x2CNi18-9 | 304L | S30403 |
|
| 1.4306 | x2CINi19-11 | 304L | S30403 | 0OCr18Ni9 |
| 1.4311 | x2CrNiN18-10 | 304LN | S30453 |
|
| 1.4301 | X5CrNi18-10 | 304 | S30400 | 06Cr19Ni10(GB/T3280-2007) |
| 1.4948 | X6CrN18-11 | 304H | S30409 |
|
| 1.4303 | x5CrNi18-12 | 305 |
|
|
| 1.4541 | x6CrNiT18-10 | 321 | S32100 | 0Cr18Ni11Ti |
| 1.4878 | x12CrNiTi18-9 | 321H | S32109 |
|
| 1.4404 | x2CrNiMo17-12-2 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4432 | x2CrNiMo17-12-3 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4435 | x2CrNiMo18-14-3 | 316L | S31603 | 00Cr17Ni14Mo2 |
| 1.4401 | X5CrNiMo17-12-2 | 316 | S31600 | 0Cr17Ni12Mo2 |
| 1.4436 | x3CrNiMo17-13-3 | 316 | S31600 | 0Cr17Ni12Mo2 |
| 1.4406 | x2CtNiMoN17-12-2 | 316LN | S31653 |
|
| 1.4571 | x6CrNiMoTi17-12-2 | 316Ti | S31635 |
|
| 1.4429 | x2CrNiMoN17-13-3 | 316LN | S31653 |
|
| 1.4438 | ×2CrNiMo18-15-4 | 317L | S31703 |
|
| x10CrNiTi18-9 | 347 |
| 0Cr18Ni11Nb |
| 1.4512 | x6CrTi12 | 409 |
| 0Cr11Ti |
|
|
| SS41000 | oCr13 |
|
| 410 |
| 1Cr13 |
|
| 4201 |
| 2Cr13 |
| 1.4016 | x6Cr17 | 430 |
| 1Cr17 |
| 1.4118 | x40CrMo15 | 440A | S44002 | 8Cr13 |
| 1.4112 |
| 440B | S44004 | 9Cr13 |
| 1.4125 |
| 440C | S44003 | 11Cr18 |
|
| 440F | S44020 |
|
| 1.4539 | 1NiCrMoCu25-20-5 | 904L | N08904 | 00Cr20Ni25Mo4.5Cu |
| 1.4547 | X1CrNiMoCuN20-18-7 |
| S31254 |
|
Surface classification：
| Surface | Characteristic | Processing Technology |
| N0.1 | Original | Pickled after hot rolling |
| 2D | Blunt | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling |
| 2B | Blurred | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + tempering rolling |
| N0.3 | Matte | Polishing and tempering rolling with 100-120 mesh abrasive materials |
| N0.4 | Matte | Polishing and tempering rolling with 150-180 mesh abrasive material |
| NO.240 | Matte | Polishing and tempering rolling with 240 mesh abrasive materials |
| NO.320 | Matte | Polishing and tempering rolling with 320 mesh abrasive materials |
| NO.400 | Matte | Polishing and tempering rolling with 400 mesh abrasive materials |
| HL | Brushed | Grind the surface of the steel belt with an appropriate grinding grain size to make it show a certain longitudinal texture |
| BA | Bright | The surface is annealed and shows high reflectivity |
| 6K | Mirror | Rough grinding and polishing |
| 8K | Mirror | Fine grinding and polishing |
